ServicesWhole-Home Filtration
Whole-Home Filtration in Jacinto City
Our whole-home filtration treats water at the main line, before it splits off to your kitchen, bathrooms, laundry and water heater. You'll have a set arrival window and a fair idea of how long the job runs before we show up, and if anything shifts, we tell you as soon as we know.
How whole-home filtration works in your house
The system mounts on your main water line, typically close to where it comes into the house or near the water heater. Everything flowing in goes through a sediment filter and then carbon before any faucet sees it. The carbon takes out the chlorine taste and odor that treated city water carries, and it does it for your shower and washer, not only the kitchen sink.
It's a good choice when the trouble isn't limited to one room: a bleachy smell rising from a hot shower, grit in the faucet screens, that same flat taste from sink to sink. If the water you drink is your main concern, reverse osmosis may be the better match. And if you aren't sure what's in your water yet, water testing is a sensible place to start. We'll tell you plainly which one fits.
The whole-home systems we install are NSF Certified. Installation costs you nothing, and our full services after the sale mean filter changes go on our calendar, not yours.
What comes with your system
- A check of your plumbing first
- We look at your water pressure, pipe size and where the main line enters before suggesting a size. That shows us how much flow the system needs to handle and where it fits best.
- Sediment pre-filter
- The first stage traps sand, grit and flakes of rust so they never reach the carbon. That extends the life of the main filter and keeps showerheads and faucet screens clear.
- Carbon filtration stage
- This is the stage that strips chlorine taste and smell from every drop in your home. We match it to your household so pressure stays strong with two showers going.
- Bypass valve and shutoffs
- A bypass valve lets us change filters or work on the housing while the rest of the house still has running water.
- Free installation and cleanup
- You pay nothing for installation. We cover the floor in our work area, haul off packaging and old fittings, and point out each shutoff before heading out.
- Full services after the sale
- We note when your filters are due and book service visits with you in advance. Every visit has an arrival window, so you can plan the rest of your day.
Signs your home could use whole-home filtration
A bleach smell when you shower
Hot water pulls chlorine into the steam, which is why the odor tends to be worst in the bathroom. A kitchen pitcher filter does nothing for that.
Specks in faucet screens
Sand or rust-colored flecks caught in an aerator mean sediment is traveling through your pipes and reaching your fixtures.
Dry skin and dull hair
Plenty of people find their skin and hair feel softer once the chlorine is out of their bath and shower water.
Every faucet tastes the same
When the bathroom sink has the same off taste as the kitchen tap, one fixture isn't to blame. It points back to the supply feeding the whole house.
Too many small filters to track
A pitcher in the fridge, a shower filter upstairs, a fridge cartridge to replace. Filtering once at the main line is usually easier to maintain.
What to expect on install day
- 1
We plan it together by phone
We ask about your house, what you've noticed in the water and which days work for you. You come away with a realistic install date and a set arrival window.
- 2
A reminder the day before
We call to confirm your window ahead of time. If a part runs late or an earlier job goes long, we let you know the moment we find out, before you're left waiting.
- 3
Putting the system in
Most jobs wrap up in one visit. We shut the water off just for the stretch when we connect to the main, and we tell you first, along with roughly when it'll be back on.
- 4
Flush, test and walk you through it
We run water through the new filters, check every joint for leaks and verify your pressure. Before we go, we show you the bypass and tell you when the first filter change comes due.
What moves the price of whole-home filtration
Every house has its own plumbing layout, so we learn about yours before we put a number on anything. Installation is free. What you pay depends on the system you pick and the work needed to tie it into your main line, and we go over each part by phone so nothing on the final bill catches you off guard.
- How many people and bathrooms
- A busy house with several bathrooms needs a bigger tank or filter housing so pressure holds up when everyone's getting ready at once.
- What the system has to remove
- A setup aimed at chlorine and sediment is simpler than one built for other problems a water test brings to light.
- Location of your main line
- A line that's easy to reach in the garage or on an outside wall makes for a quicker job than one that needs new pipe run to a better spot. Slab foundations are common around the Houston area, and on those the line usually surfaces in one of those two places.
- Your pipes and fittings
- Copper, PEX and older galvanized pipe each call for different connections. If the fittings where we tie in are corroded, they may need to be replaced.
- Filter media and upkeep
- Longer-lasting carbon costs more at the start but needs changing less often. We lay out that trade-off so the choice is yours.
Whole-home filtration questions
Something not covered here? (713) 575-2946
How long is the water shut off on install day?
Just for the stretch when we connect to the main line, which is a small part of the visit. We give you a heads-up before it goes off and a rough idea of when it'll be back. Everything else gets done with your water on.
Does filtering the whole house weaken the water pressure?
It shouldn't if the system fits your home's flow. We measure your pressure and look at your pipe size before recommending anything for exactly that reason. Weak showers after an install usually trace back to a unit that's too small, so we size to how your household actually uses water.
Do I still need a drinking water filter?
For most families, whole-home carbon takes care of chlorine taste and odor at every faucet. Some people like an extra step of treatment for the glass on the table and the pot on the stove, and a reverse osmosis unit at the kitchen sink pairs well with a whole-home system. If one system covers what you need, we'll tell you that.
How often do the filters need changing?
That depends on the media and how much water your home goes through. The sediment filter typically needs changing sooner than the carbon stage. Since we offer full services after the sale, we keep the dates on our end and call you to book a visit with an arrival window.
What if your crew is running behind on install day?
You get a call from us. If an earlier job takes longer or plans shift, we reach out as soon as we know and give you an updated time. Nobody should spend the afternoon waiting by the window.
Do you install outside Jacinto City?
We do. We put in whole-home systems in Galena Park, Pasadena, Channelview and other nearby communities, and the scheduling works just the same there.
Choose an install day that fits your week
Give us a ring, describe what you've been tasting or smelling, and let us know which days are open. We'll recommend a system and set an arrival window you can build your day around.